Кромкооблицовочный станок CORMAK EBM 250
- Під замовлення
- Код: EBM 250
Відправка з 03 жовтня 2026Ціну уточнюйте
Мінімальна сума замовлення на сайті — 1 000 ₴
- +380 (63) 723-84-54Лайф
An automatic edge bending machine EBM 250 covering and treating 4 sides.
The edge bending machine serves for ready covering of furniture element edges traditionally with an elastofol (standotron) border as well as with PVC and ABS borders. The border maximal thickness cannot exceed 3 mm.
The term “ready covering” is understood as performing of the following operations in an automatic cycle and one additional operation:
- glue applying on a board edge;
- gluing the border;
- glue excess longitudinal milling flush with the board;
- the border complete rounding of 2 mm thick;
- cutting the border front and end flush with the board.
Technical data:
|
Borders thickness (mm) |
0.5 - 3 |
|
Covered boards thickness (mm) |
12 - 45 |
|
Minimal covered boards length (mm) |
150 (>2800) |
|
Minimal covered boards width (mm) |
100 (>90) |
|
Feed speed (m/min) |
7 |
|
Mills rotational speed (rpm) |
10.500 |
|
Glue temperature |
120 - 220oC |
|
Tank capacity |
1.2 l |
|
Glue preparation time |
approx. 20 min |
|
Installed power (W) |
4000 |
|
Compressed air pressure (bar) |
6 - 8 |
|
Dimensions (mm) |
2780 x 1000 x 1150 |
|
Weight (kg) |
300 |
| Основні | |
|---|---|
| Виробник | Cormak |
| Країна виробник | Польща |
- Ціна: Ціну уточнюйте
